Gw-instek GSP-810 User Manual Manual de usuario descargar pdf (Pagina 7)

GSP-810 User Manual

Use and Wear

CAUTION

• Do not exceed +30 dBm into the RF INPUT or +30 dBm reverse power into the

TG OUTPUT.

• Do not place any heavy object on the instrument.

• Avoid severe impacts or rough handling that could damage the GSP-810.

• Use electrostatic discharge precautions while handling and making

connections to the GSP-810.

• Do not place wires into the connectors of the GSP-810, only mating connectors

and adapters.

• Do not block or obstruct cooling fan vent opening on side panels or on the rear

panel of unit.

1) Disassembly of the Instrument

• Do not disassemble the instrument; refer the instrument to a factory approved

service facility only.

2) AC Power Input

CAUTION

• AC input should be within the range of selected line voltage +/- 10%.

• Insure the correct fuse is installed prior to applying voltage for the first time -

90 V ~ 132 VAC input : T 1A / 250V

198 ~ 250 VAC input : T0.5A / 250V

• Check the line voltage setting on the rear panel. If the line voltage does not

match input voltage, change as follows:

a) Remove AC Power Cord;

b) Open cover of AC socket with flat blade screwdriver;

c) Remove selector Cam Drum and rotate to the correct voltage selection

d) Replace Cam Drum.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Sin comentarios

Gw-instek GSP-810 User Manual Manual de usuario Pagina 7