Gw-instek APS-1102 Control Software User Manual Manual de usuario descargar pdf (Pagina 36)

4 Basic Controller

4.6 Logging

Open the [Logging] window (

6). Following two methods are available.

 From the Menu Bar, click [Tool] - [Logging].

 On the Tool Bar, click the [Logging] icon (

4.2.2).

4.7 Arbitrary Waveform Editing

Show the Arbitrary waveform editing tool (

7). Following two methods are available.

 From the Menu Bar, click [Tool] - [Edit Waveform].

 On the Tool Bar, click the [Arbitrary Waveform Editing] icon (

4.2.2).

4.8 Restrictions in the Communication Offline State

In the Basic controller, when you perform an operation that needs communication (e.g., clicking Set,

Reload, or OUTPUT), communication with the connected APS power source is attempted. When the

communication is established, the software inquires the APS power source about the settings, and

updates each setting values in the window.

In the communication offline state, each setting value cannot be obtained from the APS power source.

So, when an operation requiring the communication like shown above was performed, each setting

value in the window is populated with the default value held by the software.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

Sin comentarios

Gw-instek APS-1102 Control Software User Manual Manual de usuario Pagina 36