Gw-instek APS-1102 Control Software User Manual Manual de usuario Pagina 60
- Pagina / 96
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
7 Arbitrary Waveform Editing
47
7.5 Waveform Display Section
7.5.1 Waveform Display Area
The waveform data currently being created is always displayed in the waveform display area.
In the waveform display area, coordinate values indicating the display area size, markers used for each
operation (
7.5.3), and the grid for checking the waveform rate (
7.5.6) are drawn in addition to
the waveform data.
7.5.2 Display Magnification
In the waveform display area, you can expand the displayed waveform by changing the display
magnification horizontally and vertically.
Display magnification of vertical axis
The vertical magnification can be set to [1:1] (displays the complete waveform), [1:2] (expands half of
the waveform to be displayed in the entire screen), [1:4], or up to [1:256].
To set the display magnification, click the button located in the upper part of the vertical scroll bar
and select the desired magnification from the displayed list. Pressing the or key while the
magnification list is displayed increases the magnification, and pressing the or key decreases the
magnification. Pressing the Home key shows the waveform in its original size, and pressing the End
key displays the waveform in the maximum magnification.
Display magnification of horizontal axis
The horizontal magnification can be set to [1:1] (displays the complete waveform), [1:2] (expands half
of the waveform to be displayed in the entire screen), [1:4], or up to [1:128].
To set the display magnification, click the button located on the right of the horizontal scroll bar
and select the desired magnification from the displayed list. Pressing the or key while the
magnification list is displayed increases the magnification, and pressing the or key decreases the
magnification. Pressing the Home key shows the waveform in its original size, and pressing the End
key displays the waveform in the maximum magnification.
Scrolling
When the vertical/horizontal magnification is set to [1:2] or more, you can slide the scroll bar.
The coordinate values of the waveform display area changes as you slide the scroll bar. You can drag
the scroll bar to the desired coordinates to observe other parts of the waveform.
- REVISION 1.0 December 2013 1
- ISO-9001 CERTIFIED 1
- MANUFACTURER 1
- Preface 4
- Safety Precautions 5
- Disclaimer 6
- About Copyrights 6
- Contact Us 6
- Contents 8
- Figures and Tables 12
- Outline 14
- 1.1 Overview 15
- 1.2 Software Configuration 16
- Installation 17
- 2.1 System Requirements 18
- 2.2 Installation Procedure 19
- 2 Installation 20
- Control Software Operation 21
- 3.1 Start and Exit 22
- 3.5 Common Display Section 25
- 3.6 System Setting 26
- 3.7 Error Message 26
- Basic Controller 27
- 4.2.1 Menu Bar 29
- 4.2.2 Tool Bar 29
- 4.2.4 Basic Setting 30
- 4.2.5 Output Setting 31
- 4.2.6 Limiter Setting 32
- 4.2.7 Operation Bar 32
- OUTPUT Off 32
- OUTPUT On 32
- 4.3.1 Save As 33
- 4.3.2 Save 33
- 4.3.3 File Reading 33
- CAUTION 33
- 4.4 Memory 34
- 4.5 Status 35
- 4.6 Logging 36
- Sequence 37
- 5 Sequence 38
- 5.2.2 Tool Bar 40
- 5.2.3 Basic Setting 40
- 5.2.4 Step Arrangement 41
- Display disabled 44
- Display enabled 44
- Change the operation type 45
- 5.3 Sequence Setting File 46
- 5.4 Control 47
- 5.4.5 Output On 48
- 5.4.6 Output Off 48
- 5.4.7 Switch Execution Mode 48
- Measurements Logging 49
- 6 Measurements Logging 50
- 6.3.1 Menu Bar 51
- 6.3.2 Tool Bar 51
- 6.3.4 Logging Conditions 52
- 6.4 Log Display Section 53
- 6.5 Measurements Log File 53
- Arbitrary Waveform Editing 54
- 7.1 Overview 55
- 7.4.1 Menu Bar 58
- Select Item Panel 59
- 7.5.1 Waveform Display Area 60
- 7.5.2 Display Magnification 60
- 7.5.3 Markers 61
- 7.5.4 Waveform Manipulation 62
- 7.5.6 Grid 64
- 7.6 File Operation 65
- 7.7 Printing Waveforms 67
- 7.8.1 Range/Page 69
- 7.8.2 Select a Waveform 69
- 7.8.3 Parameter Setting 70
- 7.8.7 Print 77
- 7.9 Interpolate 78
- 7.9.1 Control Point Setting 79
- 7.9.2 Execute Interpolation 80
- 7.10 Operation 83
- 7.10.1 Types of Operation 84
- 7.10.3 Operation Execution 84
- 7.11 Compress/Expand 86
- button or Expand with 89
- button 89
- 7.12 System Setting 90
- 7.13 Memory 91
- Maintenance 93
- 8.1 CD-ROM Management 94
- 8.2 Replace Damaged CD-ROM 94
- 8.3 Check Version 94
Relacionado con productos y manuales para Equipo Gw-instek APS-1102 Control Software User Manual
Equipo Gw-instek PCS-1000 Manual de usuario
(93 paginas)
(93 paginas)
Equipo Gw-instek GPD-4303S Manual de usuario
(59 paginas)
(59 paginas)
Equipo Gw-instek APS-1102A User Manual Manual de usuario
(285 paginas)
(285 paginas)
Equipo Gw-instek PPH-1503 Manual de usuario
(137 paginas)
(137 paginas)
Equipo Gw-instek LCR-914 Manual de usuario
(28 paginas)
(28 paginas)
Equipo Gw-instek LCR-800 Series Manual de usuario
(72 paginas)
(72 paginas)
Equipo Gw-instek GPM-8212 Manual de usuario
(14 paginas)
(14 paginas)
Equipo Gw-instek GFC-8010H Manual de usuario
(10 paginas)
(10 paginas)
Equipo Gw-instek GFC-8131H Manual de usuario
(7 paginas)
(7 paginas)
Equipo Gw-instek GLC-9000 User Manual Manual de usuario
(187 paginas)
(187 paginas)
Equipo Gw-instek LCR-8000G Series Manual de usuario
(72 paginas)
(72 paginas)
Equipo Gw-instek GVT-427B Manual de usuario
(9 paginas)
(9 paginas)
Equipo Gw-instek GAD-201G Manual de usuario
(8 paginas)
(8 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales