Gw-instek GDS-1000-U Series Programming Manual Manual de usuario descargar pdf (Pagina 5)

INTERFACE OVERVIEW

Configuring the USB Interface

USB connection

PC end

Type A, host

GDS-1000-U end

Type B, slave

Speed

1.1/2.0 (full speed)

Procedure

1. Connect the USB cable to

the USB slave port on the

GDS-1000-U.

2. When the PC asks for the USB driver, select

dso_cdc_1000.inf which is downloadable from

the GW website, www.gwinstek.com.tw, GDS-

1000-U product corner.

3. On the PC, activate a terminal application such

as MTTTY (Multi-Threaded TTY). To check the

COM port No., see the Device Manager in the

PC. For WindowsXP, select Control panel →

System → Hardware tab.

4. Run this query command via the terminal

application.

*idn?

This command should return the manufacturer,

model number, serial number, and firmware

version in the following format.

GW, GDS-1052-U, 000000001, V1.00

5. Configuring the command interface is

completed. Refer to the programming manual

for the remote commands and other details.

1 2 3 4 5 6 7 8 9 10 ... 69 70

Sin comentarios

Gw-instek GDS-1000-U Series Programming Manual Manual de usuario Pagina 5