Gw-instek PSU-Series Programming User Manual Manual de usuario descargar pdf (Pagina 80)

PSU Programming Manual

Parameter

OFF | 0

Turns the OCP off.

ON | 1

Turns the OCP on.

Return parameter

<bool>

Returns the over current protection state in

<bool> format.

Example

SOUR:CURR:PROT:STAT OFF

Turns OCP off.

[:SOURce]:CURRent:PROTection:TRIPped

Set

Query

Description

Returns the state of the current protection circuits.

Query Syntax

[:SOURce]:CURRent:PROTection:TRIPped?

Return parameter

<bool>

Returns protection status.

Example

SOUR:CURR:PROT:TRIP?

The protection circuit has not been tripped.

[:SOURce]:CURRent:SLEW:RISing

Set

Query

Description

Sets or queries the rising current slew rate. This is

only applicable for CC slew rate priority mode.

Syntax

Query Syntax

[:SOURce]:CURRent:SLEW:RISing

{<NR2>(A)|MINimum|MAXimum}

[:SOURce]:CURRent:SLEW:RISing?

Parameter

<NR2>

Per step is Rated Current divided by 100 ms.

MIN

Minimum rising current slew rate.

MAX

Maximum rising current slew rate.

Return parameter

<NR2>

Returns the step current in amps.

Example

SOUR:CURR:SLEW:RIS?

0.950

Sets the rising current slew rate to 0.950 A/ms.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 127 128

Comentarios a estos manuales

Sin comentarios

Gw-instek PSU-Series Programming User Manual Manual de usuario Pagina 80

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Gw-instek PSU-Series Programming User Manual