Gw-instek GDS-800 Series Programming Manual Manual de usuario descargar pdf (Pagina 51)

GDS-806/810/820/840 Programming Manual

:TEMPlate<X>:UPLoad (Available for firmware 2.0 and above only)

Upload the user-defined template to the assigned location.

Syntax

:TEMPlate1:UPLoad#3548………

Format:

The string of data is following.

# Data size

digit

Data size Package

type

Template

number

Position Text string Reserved Check

sum

Template

data

#: Begin a transmission of data string.

Data size digit: Indicate the digits of following data string amount(1 digit), The

value is ‘3’ in ASCII code.

Data size: The amount of current data string (3 digits). The value is “548” in ASCII

code.

Package type: The GO/NO-GO template package type (1 bytes). The value is

0x03 in hex.

Template number: The location of template stored in memory. The valid range is

from 1 to 100 dots. The content is a single byte in hex (0x01 ~ 0x64).

Position: The position of template. The valid range is from -300 to +300 dots. The

content is a two bytes signed integer in hex (0xFED4 ~ 0x012C). (2 bytes, high byte

first)

Text string: The user defined string that will be shown on the screen. Here we

support English only. The string must include an ending character 0x00. (39

bytes).

Reserved: This location is reserved for future usage. (1 bytes).

Check sum: The check sum value is coming from the sum of 500 bytes of template

data. This value is 32 bits unsigned integer in hex (4 bytes, high byte first).

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 88 89

Sin comentarios

Gw-instek GDS-800 Series Programming Manual Manual de usuario Pagina 51