Gw-instek GDS-800 Series Programming Manual Manual de usuario descargar pdf (Pagina 53)

GDS-806/810/820/840 Programming Manual

:TEMPlate:MIN (Available for firmware 2.0 and above only)

Sets and query the number of template used for minimum boundary.

Before running this command, the oscilloscope has to be initialized as “Normal

Template” mode, please add the command of “:TEMPlate:MODe 0” in order to

change the settings.

Syntax

:TEMPlate:MIN {1|100}

:TEMPlate:MIN?

Returns

<NR1>

Note: A template can be defined as either MAX or MIN template only.

Note B: Before running this command, the oscilloscope has to be initialized, please add the

command of “:GONogo:FUNCtion 1” in order to initial the oscilloscope.

:TEMPlate:MODe (Available for firmware 2.0 and above only)

Sets and query the template mode. When we select Auto mode, the auto template

source is coming from CH1 or CH2. When we set normal mode, the template is

coming from 1 of the 100 templates or RefA or RefB.

Syntax

:TEMPlate:MODe {0|1}

:TEMPlate:MODe?

Arguments

0→ Select normal template. 1→ Select auto template.

Returns

<NR1>

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 88 89

Sin comentarios

Gw-instek GDS-800 Series Programming Manual Manual de usuario Pagina 53