Gw-instek PEL-3000 Series Programming Manual Manual de usuario descargar pdf (Pagina 79)

COMMNAND OVERVIEW

:CURRent:FREQuency

Set

Query

Description

Sets the CC dynamic mode switching frequency.

This command along with the “:CURRent:DUTY”

command is used when the dynamic time setting

is set to “Freq./Duty”.

This command is only applicable for dynamic

mode.

Syntax

:CURRent:FREQuency {<NRf> | MINimum |

MAXimum}

Query Syntax

:CURRent:FREQuency?

Commands

:CURRent:DUTY

Parameter

<NRf>

Sets the switching

frequency in hertz.

MINIMUM or MIN

Minimum frequency

MAXIMUM or MAX

Maximum frequency

Return parameter

<NR2>

Returns the frequency in

hertz.

Example

:CURRent:FREQuency 60

Sets frequency to 60Hz.

Query example

:CURRent:FREQuency?

>60

Returns the switching frequency (60Hz).

:CURRent:DUTY

Set

Query

Description

Sets the positive duty cycle for the CC dynamic

mode switching frequency. This command along

with the “:CURRent:FREQuency” command is

used when the dynamic time setting is set to

“Freq./Duty”.

This command is only applicable for dynamic

mode.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 173 174

Comentarios a estos manuales

Sin comentarios

Gw-instek PEL-3000 Series Programming Manual Manual de usuario Pagina 79

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Gw-instek PEL-3000 Series Programming Manual